FSW17M Flange Spreading Wedge Twin Tool & Pump Kit

The FSW17 flange spreading wedge is powered by a 10,000 PSI pump & can enter a flange joint access gap as little as 0.24” and produce a maximum force of 32.6T when used in pairs (as recommended) to push the mating faces of flanges apart. The FSW17 can create a gap up to 3.19” between flange faces with the stepped blocks fitted facilitating the replacement of gaskets, seal ring’s, or other flange face maintenance and testing.

It is strongly recommended that a minimum of 2 flange spreading wedges are used when spreading a flange joint. The flange spreading wedges should be positioned at opposite sides of the flange joint and actuated as necessary to maintain a parallel joint gap.

• 100% Load/Pressure tested and certified
• High durability High Quality low Maintenance design
• Tool weight 15.4lbs
• Max Spreading force 16.3T  (32.6 T when used in pairs)
• Spreading distance 6mm 0.24” to 3.19” (when used with stepped blocks)
• Robust Moulded Case for easy transportation and storage

Kit Dimensions

• Kit weight: 31Kg (68.3lbs)
• Kit Dims.: 36.2” x 20.1” x 8.3”
• Tool Weight: 15.4lbs
• Tool Dims.: 3.0” x 6.1” x 13.8”

Kit Contents

• 2 x FSW17 Tool
• 2 x Safety Block
• 2 x Safety Lanyard
• 4 x Stepped Blocks with securing screws and allen key
• 1 x PH300T Sealed Hydraulic Hand Pump with twin outlets and screw couplers.
• 2 x Hydraulic Pressure Gauges complete with gauge adaptors.
• 2 x 2M hydraulic hoses complete with screw couplers.
• 1 x Instruction Manual
• 1 x Robust moulded carry case

Download the FSW17M Data Sheet Here